Robocode/Developers Guide for building Robocode
This guide describes how to build the Robocode application, i.e. the game itself, and not how to build bots for Robocode.
Developer's Guide for building Robocode with Eclipse setup
This guide is intended for experienced Java developers, who want to work on the Robocode application, and describes all basic stuff required to compile and run Robocode within the Eclipse IDE.
Basically, all you need to get started with building Robocode is:
- Oracle JDK 8 (Java SE Development Kit 8 Downloads). Note that only version 6, 7, and 8 will work. Newer versions are not supported (yet) and are almost guaranteed to cause building problems.
- Source files for Robocode (on GitHub), which you get by doing a Git clone.
- An Internet connection.
Other than that, you need to be a skilled Java developer in order to figure out how Robocode is put together. Robocode is a complex application and requires a big effort to grasp and understand. There is practically no documentation available that describe the internal logic, architecture, game rules, coding conventions etc. So you will probably be on your own when trying to figure out how Robocode it put together.
An Internet connection is required for building Robocode distribution files as the build tool (Maven) needs access to remote repositories, which contains various libraries and binaries. Some libraries are used for building Robocode, and others are used for running Robocode, and hence need to be put into the distribution files. In order to get updates to the sources of Robocode when new versions emerge, an Internet connection is also critical to download changed sources and merge the changes with your version of the sources etc.
Note that all sources of Robocode are for Java 6, meaning that Robocode is able to run on very old Java versions, which is intentional.
Installing the JDK
Robocode is being developed using Oracle's Java SE, and requires the Java Developer Kit (JDK), minimum version 6, to be pre-installed on the system used for building Robocode. Please note that a Java Runtime Environment (JRE) is not enough as it does not contain the required developer tools needed for building Robocode. Currently, the Oracle JDK version 8 is recommended for building Robocode.
Notice that when installing the JDK, it is highly recommended that you install the sources provided for Java as the sources are very useful when debugging Robocode. However, this is not a requirement.
Setting up Java Environment Variables
You must set up the environment variable named JAVA_HOME and extend another environment variable named PATH. You find information on how to setup JAVA_HOME and PATH on the net, e.g. here.
JAVA_HOME must be set up point to the root directory of the JDK you intend to use.
The PATH environment variable must be extended in order to locate the Java commands like 'java', 'javac' and lots of other tools in the JDK. Extending PATH is considered best practice when setting up the Java development environment, and makes it possible for other tools like e.g. Maven to locate the proper JDK tools. It also makes it possible for you to detirmine which JRE that is being used when running a Java application by writting
java -version in the command-line/shell, and detirmine which Java compiler that is being used by writting
javac -version instead.
- JAVA_HOME is set to e.g.
- PATH is extended, e.g. to
Linux / *nix:
- JAVA_HOME is set by e.g.
export JAVA_HOME=/usr/java/jdk1.8.0_162/bin/java. (Bash)
- PATH is extended, e.g. by
export PATH=$JAVA_HOME/bin:$PATH. (Bash)
Mac OS X:
- JAVA_HOME is set by e.g.
- PATH is extended, e.g. by
If you want more information on how to set up your JAVA_HOME and PATH environment variables for your specific OS, please read the installation notes provided for the Oracle JDK here:
Installation instructions from Oracle:
- JDK 8 and JRE 8 Installation Start Here.
- Oracle JDK 8 and JRE 8 Certified System Configurations Contents for all supported systems.
Required technical skills?
In order to develop on Robocode, you need to know the basics of these tools:
Notice that you do not have to be an expert in Git/GitHub, Maven, or Eclipse. But you need some basic knowledge about these tools to understand how to build Robocode. In fact, trying to build Robocode might actually be a very good way of learning these tools, if you don't know them already or miss some practical experience with these. :-)
Eclipse is not required for building Robocode, meaning that you are free to use any IDE of your choice. However, all set up for building Robocode has primarily been focused on Eclipse, and the same goes for this guide. If you manage to setup Robocode for e.g. IntelliJ IDEA or any other IDE, you are welcome to write a guide for how to set up Robocode for your particular IDE as other developers might be very interested in using the same IDE.
In order to get build Robocode, Maven must be installed on your system. At present day, Maven 3.5.4 is the newest version and is able to build Robocode. Read more about how to install Maven here. Note that the Maven Wrapper is being used by Robocode. Hence, you must run this Maven command from a command prompt or shell inside the your root directory for Robocode:
mvn -N io.takari:maven:wrapper -Dmaven=3.5.4
This will create the Maven Wrapper files for you guaranteed to run as Maven version 3.5.4, even if you might have a newer Maven installed on your system. You'll get a directory named ".mvn" and these two script files "mvnw" and "mvnw.cmd". You build Robocode by using the mvnassembly.sh or mvnassembly.cmd files, which makes use of the Maven Wrapper.
You don't have to worry too much about how to set up Eclipse for Robocode as the provided sources contain all configuration files needed for Eclipse. Some of these files are generated using Maven's built-in support for Eclipse. However, you will need to do some basic pre-configuration of Eclipse before you'll be able to get started with working on Robocode. You should only need to set up a workspace for Robocode once. However, you will need to update the sources from the remote repository on GitHub once in a while, and merge changes with your sources in order to keep up-to-date with the current versions of Robocode, i.e. the origin/head of the Robocode sources.
Getting sources from GitHub
In the following, I assume that you want to Git clone the sources from GitHub using a Git client. This could be one of the Git GUI Clients (git-gui) recommended here. You don't necessarily need a Git client for building Robocode, as you could simply download the sources as a plain .zip file from either GitHub or SourceForge. However, if you want to regularly update your local source files with the newest sources from the Git repository and the ability to commit and/or merge or fork changes, you will need to use a Git client.
The URL of the sources at GitHub is: https://github.com/robo-code/robocode.git
How to build distribution files?
In order to build the distribution files containing the installer setup file (robocode-x.x.x-setup.jar) and a .zip file containing all the sources (robocode-x.x.x-src.zip) you must call the mvnassembly script from the command-line when standing within the root directory of the Robocode sources.
This will build the distribution files, which will be put into the sub-directory named robocode.distribution/target.
mvnassembly is a script that compiles all sources of the Robocode game, creates javadoc html files, run test units, and finally creates the target distribution files. The first time this script is run, it will need to download a huge amount of .jar files from various Maven repositories and which contains Maven plugins etc. used for building Robocode. So please be patient with it the first time.
Two plugins exist for Robocode:
- Testing plugin, which contains the testbed for testing bots.
- .NET plugin, which makes it possible to run bots compiled for .NET, and packaged as .dll files.
Hence, a new Robot feature in Robocode should take the .NET plugin into account, as the .NET-based robots must behave the same way as the Java-based robots. Building the .NET plugin is a requires a big setup, and is described in a ReadMe.txt file within the source code for the .NET plugin (/plugins/dotnet).
Setting up Eclipse for developing on Robocode
Here follows a description of how to setup Eclipse for developing on Robocode.
Software Requirements for Eclipse IDE
Here follows the recommended software needed to start developing on Robocode with the Eclipse IDE:
- Oracle JDK 6 (download) must be pre-installed.
- Eclipse IDE for Java Developers(download). The Juno, Kepler, Luna works fine for Robocode and supports Git.
Please consult the installation notes provided for Eclipse in order to find out how to install Eclipse for your specific OS.
Create a workspace for Robocode
When you have setup and installed Eclipse on your system (if you did not have it on your system already), a workspace must be created for Robocode.
The first time you start up a newly installed Eclipse, it will ask for a directory for your workspace. I suggest that you create a workspace named robocode-workspace or similar and create the workspace on a partition or directory like e.g.
C: (on Windows) or
~ (on Linux) - or any other directory of your choice. If you have already got a workspace, e.g. the default one suggested by Eclipse, you can create a new workspace if you wish by selecting 'File' -> 'Switch Workspace' -> 'Other...' from the menu.
M2_REPO class path variable
One of the first things you need to do in Eclipse is to set up the M2_REPO class path variable for Eclipse, which points to your local Maven 2 repository. That is, Eclipse uses the M2_REPO class path variable for locating the Maven repository containing various libraries used for compiling Robocode etc. But before you can setup the M2_REPO class path in Eclipse, you must run the 'mvnassembly' command described earlier if you have not already done that.
When calling the 'mvnassembly' script or alternatively start off Maven within the root of the robocode sources by calling e.g. 'mvn clean install', Maven will download all required libraries from other sites into your local Maven repository. Note that you will need to locate your local Maven repository. Under Windows your Maven repository is put into your %USERPROFILE% directory, and on Linux is put into your home directory (~). The Maven repository will be put under .m2/repository.
To setup the M2_REPO class path in Eclipse, you must go to the menu bar and select 'Window' -> 'Preferences'. On the Preferences window expand the 'Java' -> 'Build Path' and select the 'Classpath Variables'. On the page for the Classpath Variables, you click on the 'New...' button, and enter M2_REPO as name. Next, you click on the 'Folder...' button and navigate to where you have your .m2/repository directory located (in %USERPROFILE% under Windows, and ~ under Linux), e.g.
C:/Users/Flemming/.m2/repository (Windows) or
When Eclipse asks you if it should rebuild the workspace, you select 'Yes'.
Configure JDK for your workspace
You must setup which JDK that will be used for compiling (and running) Robocode in your workspace. You do this by...
- selecting Window -> Preferences from the menu, and then unfold and select Java -> Installed JREs and press 'Add...' on the 'Installed JREs' page.
- Select 'Standard VM' on the 'JRE Type' page and press 'Next >' or Enter.
- Press the 'Directory...' button and browse to where you have installed your JDK 6 and press 'Finish' or Enter. Make sure to select a JDK and not a JRE, as a JRE is not sufficient as it lacks the tools available with the JDK.
- When you get back to the 'Installed JREs' page, make sure to put a check mark in the JDK you just added and press 'OK' or Enter.
Importing sources of Robocode using Git
Importing the projects for Robocode into Eclipse from Git can be done from the Package Explorer, which can be opened from the menu by selecting Window -> Show View -> Package Explorer or by using the keyboard shortcut by pressing Alt+Shift+Q and P. In the Package Explorer, you...
- Right-click the mouse and select 'Import...' in the popup menu that occurs.
- Unfold 'Git' in the 'Import' window and double-click 'Projects from Git'.
- On the 'Import Projects from Git' you select 'URI'.
- On the next page named 'Source Git Repository' to enter https://github.com/robo-code/robocode.git into the 'URI:' text field and press Enter or 'Next >'.
- On the 'Branch Selection' page you press 'Deselect All' and select the branch you want to work on. This would normally be 'master', which is the master branch of Robocode. When the branch selection is made, you press 'Next >' or Enter.
- On the 'Local Destination' page, you must note the directory where your local files will be put. I recommend you use the directory suggested by Git (Eclipse) and press 'Finish' or Enter.
- On the 'Select a wizard to use for importing projects', make sure 'Import existing projects' is selected and press 'Next >' or Enter.
- On 'Import Projects', you should deselect the first project named 'plugins' as you would normally not want to develop on plugins for Robocode - otherwise just omit deselecting 'plugins'. Press 'Finish' or Enter.
- All Robocode projects will now be imported into Eclipse and be visible in the Package Explorer.
- Now, select all projects (press Ctrl+A) and right-click the Package Explorer and select Replace With -> HEAD Revision on the popup menu that occurs, and press 'OK' or Enter to discard local changes on the dialog that appears.
Congratulations, you should now be able to get started working on the Robocode sources in Eclipse. :-)
Before launching Robocode for the first time, you should make sure that it is cleaned and compiled first. You do this by selecting Project -> Clean... from the menu. You should also make sure that you have run the 'mvnassembly' described previously, which will download and update your local Maven repository, which is necessary for compiling and running Robocode.
Please notice that it might be necessary to refresh the sources in Eclipse when files are changed outside the Eclipse editor, which is the case when running the 'mvnassembly' script. You can do this from the Package Explorer by right-clicking in this and select 'Refresh'.
In order to start running or debugging Robocode, you should select the "Bug" (debug) or "Play" (run) button in the top of Eclipse under the menu. You should press the little arrow beside these green buttons in order to choose among: Robocode, RoboRumble, TeamRumble, and MeleeRumble. The 3 last ones are for running the RoboRumble@Home clients.
How to run the unit tests?
When you want to run the unit test from within Eclipse, you must do this from the the Package Explorer, where you right-click on the 'robocode.tests' project and select 'Run As' -> 'JUnit Test'. Now all available unit tests will run automatically.
Alternatively you can start the tests from the command-line by standing on your robocode workspace, and write the following Maven command.
mvn test install
./mvn.sh test install
Robocode developers and contributions
Robocode developers have discussion group at email@example.com. Everybody interested in discussion about future of Robocode are welcome. We also welcome your contributions there. The discussion group is located here: http://groups.google.com/group/robocode-developers.
- Old version of the Developer's Guide for building Robocode for Robocode versions prior to version 1.7.
- Browse the sources of Robocode.
- Download the sources of Robocode.
- Robocode developers discussion group.
- The Robocode project on SourceForge.
- How to access the SVN Repository for Robocode.
- Eclipse - an open development platform supported by Robocode.
- Apache Maven used for building Robocode.
- Guide to using Eclipse with Maven 2.x.
- Eclipse Subversive is a plugin used for accessing Subversion from Eclipse.
- Subclipse is also a plugin used for accessing Subversion from Eclipse.
- TortoiseSVN, a Subversion client for Windows.
- CollabNets Subversion, a Subversion client for both Windows and Linux.