Tomcat/Version History

v. 3.25 RoboRumble ‒ APS: 82.42% (22nd), PL: 818-11 (11th), Survival: 91.52%

• add ram avoiding (to allow turn)
• attack angle boundaries fixed (was little attack angle for escape and big for coming near)

v. 3.24 RoboRumble ‒ APS: 82.37% (23rd), PL: 816-13 (12th), Survival: 91.52%

• add uniform 0.2 danger to future bullets with fire delay more than 2 ticks
• increase min attack angle to 70 degrees
• decrease attack angle base to 30 degrees
• danger calculation changed to "not discrete"
• opponent attack angle to danger function added
• smooth walls only in orbit direction
• distance to wall threshold decresead by 22 "pixel"
• wall sitck buffer removed
• wall stick decreased to 120 "pixel"
• if wall smooth needed, then always smooth angle at least on 4 degrees
• multiply danger of prediction same as prev prediction on 0.9
• increase robot effective width to 75% for full danger and 255% for half danger
• skip bullet with travel time less than 2 tick if there another bullets
• add breaking if robot going directly to opponent
• distance to enemy removed from danger formula
• use clear distance to center in danger formula
• ramming detection fixed

v. 3.23 RoboRumble ‒ APS: 82.18% (25th), PL: 817-12 (11th), Survival: 91.54%

• bug fix in robot width radians calculation

v. 3.22 RoboRumble ‒ APS: 82.22% (25th), PL: 821-7 (6th), Survival: 91.69%

• use of enemy miss data to log selection algorithm added

v. 3.21 RoboRumble ‒ APS: 81.41% (32nd), PL: 813-14 (11th), Survival: 90.82%

• change log selection algorithm

v 3.20 RoboRumble ‒ APS: 82.06% (25th), PL: 814-12 (11th), Survival: 91.42%

• change log selection formula

v 3.19.183 RoboRumble ‒ APS: 81.82% (27th), PL: 810-16 (13th), Survival: 91.05%

• revert to version 3.17.169

v 3.18.178 RoboRumble ‒ APS: 81.7% (31st), PL: 802-24 (20th), Survival: 90.89%

• always use of my lateral speed attr in visit logs added
• removing visit logs with less than 2 attributes
• time since my dir change attr added to hits and visits log
• gun data analise optimized

v 3.17.169 RoboRumble ‒ APS: 81.92% (27th), PL: 804-21 (18th), Survival: 91.2%

• another stupid bug fix: movement data did not updated by bulletHitBullet events

v 3.16.167 RoboRumble ‒ APS: 81.36% (32nd), PL: 798-18 (15th), Survival: 90.7%

• getFuturePosition optimised
• stupid LinkedList addAll and sorting removed
• effective bearing offset interval in targeting reduced to 75%
• angle step in targeting reduced to 0.5 rad

v 3.15.155 RoboRumble ‒ APS: 81.42% (32nd), PL: 798-18 (14th), Survival: 90.86%

• sort data by time in movement data analysis added
• hypercube calculation for movement data analyses improved (use different side lengths for different dimensions)

v 3.14.153 RoboRumble ‒ APS: 80.46% (40th), PL: 778-38 (36th), Survival: 89.63%

• new movement buffers managment system - auto selecting buffers (hits and visits) and progressive visits buffer enabling
• bullets affecting area in WS increased to 155% of robot width radians

v 3.13.152 RoboRumble ‒ APS: 79.6% (45th), PL: 774-42 (38th), Survival: 88.95%

• continue of zero lateral velocity bug fix (issue #3)

v 3.12.151 RoboRumble ‒ APS: 79.52% (46th), PL: 771-44 (40th), Survival: 88.84%

• zero lateral velocity bug fix (issue #3)
• anti ram fire power selection tweak

v 3.11.146 RoboRumble ‒ APS: 78.65% (52nd), PL: 743-73 (65th), Survival: 87.44%

• default bullet power increasing reverted

v 3.10.145 RoboRumble ‒ APS: 77.69% (57th), PL: 738-77 (68th), Survival: 86.62% RETIRED

• fire selection bug fix (issue #2)
• default fire power increaded to 2.05

v 3.9.142 RoboRumble ‒ APS: 78.01% (57th), PL: 739-77 (66th), Survival: 85.33% RETIRED

• power management tweaked for more powerful bullets

v 3.8.139 RoboRumble ‒ APS: 78.95% (50th), PL: 750-66 (63rd), Survival: 87.64%

• initial release