|
|
| (4 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | This guide describes how to build the Robocode application, i.e. the game itself, and not how to build bots for Robocode. | + | This guide describes how to build the Robocode application, i.e. the game itself. |
| | | | |
| − | == Developer's Guide for building Robocode with Eclipse setup == | + | == Developer's Guide for building Robocode with IntelliJ IDEA setup == |
| | | | |
| | === Notice === | | === Notice === |
| | | | |
| − | This guide is intended for experienced Java developers, who want to work on the Robocode application, and describes all basic stuff required to compile and run Robocode within the [http://www.eclipse.org Eclipse] IDE. | + | This guide is intended for experienced Java developers, who want to work on the Robocode application, and describes all the basic stuff required to compile and run Robocode within [https://www.jetbrains.com/idea/ IntelliJ IDEA]. |
| | | | |
| − | If you just need to browse the sources, you can do it from [https://github.com/robo-code/robocode here] or you can download the zipped sources from [http://sourceforge.net/projects/robocode/files/robocode%20sources/ here]. | + | If you just need to study the sources, you can do it from [https://github.com/robo-code/robocode GibHub], where it is possible to download the source code as a zip file under 'Code'. |
| | | | |
| | === Requirements === | | === Requirements === |
| | | | |
| − | Basically, all you need to get started with building Robocode is:
| + | To get started with building Robocode you need: |
| | + | * An Internet connection, as Robocode has dependencies to libraries that are available on public binary repositories. |
| | + | * [https://git-scm.com/downloads Git] |
| | + | * [https://www.jetbrains.com/idea/download/ IntelliJ IDEA] |
| | + | * JDK 8, e.g. [https://adoptopenjdk.net/?variant=openjdk8 AdoptOpenJDK 8] |
| | | | |
| − | * Oracle JDK 8 ([https://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html Java SE Development Kit 8 Downloads]). Note that only version 6, 7, and 8 will work. Newer versions are not supported (yet) and are almost guaranteed to cause building problems.
| + | Note that JDK 8 is required for Robocode to ensure all binaries can run on Java 8. If you build a customized version of your own, you are of course free to use a newer JDK version. But notice that the build tools might not be work with newer Java versions. So you'll need to fix this by yourself. |
| − | * Source files for Robocode ([https://github.com/robo-code/robocode on GitHub]), which you get by doing a Git clone.
| |
| − | * An Internet connection.
| |
| | | | |
| − | Other than that, you need to be a skilled Java developer in order to figure out how Robocode is put together. Robocode is a complex application and requires a big effort to grasp and understand. There is practically no documentation available that describe the internal logic, architecture, game rules, coding conventions etc. So you will probably be on your own when trying to figure out how Robocode it put together.
| + | Make sure that your JAVA_HOME and PATH is set up to use the JDK 8 when building the Robocode application. There is a good guide [https://www.baeldung.com/java-home-on-windows-7-8-10-mac-os-x-linux here]. |
| | | | |
| − | An Internet connection is required for building Robocode distribution files as the build tool (Maven) needs access to [http://maven.apache.org/guides/introduction/introduction-to-repositories.html remote repositories], which contains various libraries and binaries. Some libraries are used for building Robocode, and others are used for running Robocode, and hence need to be put into the distribution files.
| + | === Cloning the Robocode project === |
| − | In order to get updates to the sources of Robocode when new versions emerge, an Internet connection is also critical to download changed sources and merge the changes with your version of the sources etc.
| |
| | | | |
| − | Note that all sources of Robocode are for Java 6, meaning that Robocode is able to run on very old Java versions, which is intentional.
| + | You need to download the source files for the Robocode project into your PC using Git with this command line: |
| | | | |
| − | ==== Installing the JDK ====
| + | git clone https://github.com/robo-code/robocode.git robocode-proj |
| | | | |
| − | Robocode is being developed using Oracle's Java SE, and requires the Java Developer Kit ('''JDK'''), minimum version 6, to be pre-installed on the system used for building Robocode. Please note that a Java Runtime Environment ('''JRE''') is not enough as it does not contain the required developer tools needed for building Robocode. Currently, the Oracle JDK version 8 is recommended for building Robocode.
| + | This downloads the Robocode source files into a directory named 'robocode-proj' into the current directory. |
| | | | |
| − | Notice that when installing the JDK, it is highly recommended that you '''install the sources provided for Java''' as the sources are very useful when debugging Robocode. However, this is not a requirement.
| + | === Building the Robocode application === |
| | | | |
| − | ==== Setting up Java Environment Variables ====
| + | Robocode is built by running using Gradle standing in the 'robocode-proj' directory: |
| | | | |
| − | You must set up the environment variable named '''JAVA_HOME''' and extend another environment variable named '''PATH'''. You find information on how to setup JAVA_HOME and PATH on the net, e.g. [https://docs.oracle.com/cd/E19182-01/821-0917/inst_jdk_javahome_t/index.html here].
| + | ./gradlew build |
| | | | |
| − | '''JAVA_HOME must be set up point to the root directory of the JDK you intend to use.'''
| + | This step is required to easy importing the project into IntelliJ IDEA, but also the quickest way to build and test Robocode. |
| | | | |
| − | The PATH environment variable must be extended in order to locate the Java commands like 'java', 'javac' and lots of other tools in the JDK. Extending PATH is considered best practice when setting up the Java development environment, and makes it possible for other tools like e.g. Maven to locate the proper JDK tools. It also makes it possible for you to detirmine which JRE that is being used when running a Java application by writting <code>java -version</code> in the command-line/shell, and detirmine which Java compiler that is being used by writting <code>javac -version</code> instead.
| + | === Setup Robocode for IntelliJ === |
| | | | |
| − | '''Windows:''' | + | First, open the 'robocode-project' directory in IntelliJ. |
| − | * JAVA_HOME is set to e.g. <code>JAVA_HOME="C:\Program Files\Java\jdk1.8.0_162"</code>.
| |
| − | * PATH is extended, e.g. to <code>PATH=%JAVA_HOME%\bin;PATH</code>.
| |
| | | | |
| − | '''Linux / *nix:'''
| + | Secondly, set the JDK for the Robocode project, which needs to be JDK 8. |
| − | * JAVA_HOME is set by e.g. <code>export JAVA_HOME=/usr/java/jdk1.8.0_162/bin/java</code>. (Bash)
| |
| − | * PATH is extended, e.g. by <code>export PATH=$JAVA_HOME/bin:$PATH</code>. (Bash)
| |
| | | | |
| − | '''Mac OS X:'''
| + | From the menu, select: |
| − | * JAVA_HOME is set by e.g. <code>export JAVA_HOME=$(/usr/libexec/java_home)</code>.
| + | File > Project Structure | Platform Settings | SDKs > + (plus sign) > Add JDK |
| − | * PATH is extended, e.g. by <code>export PATH=${JAVA_HOME}/bin:$PATH</code>.
| |
| | | | |
| − | If you want more information on how to set up your JAVA_HOME and PATH environment variables for your specific OS, please read the installation notes provided for the Oracle JDK here:
| + | Select the home directory of your JDK 1.8 installation. |
| | | | |
| − | '''Installation instructions from Oracle:''' | + | The last step is to align IDEA with the Gradle setup. You do this by running the 'Reload All Gradle Projects', which is available by pressing the "refresh button" with the Gradle tool window in its top-left corner. |
| − | * [https://docs.oracle.com/javase/8/docs/technotes/guides/install/install_overview.html JDK 8 and JRE 8 Installation Start Here].
| |
| − | * [https://www.oracle.com/technetwork/java/javase/certconfig-2095354.html Oracle JDK 8 and JRE 8 Certified System Configurations Contents] for ''all'' supported systems.
| |
| | | | |
| − | ==== Required technical skills? ====
| + | [[File:Gradle refresh.png]] |
| | | | |
| − | In order to develop on Robocode, you need to know the basics of these tools:
| + | === Run the Robocode application === |
| | | | |
| − | * Git and GitHub ([http://www.vogella.com/articles/Git/article.html Tutorial])
| + | You can run or debug Robocode as soon as Robocode has been set up in IntelliJ. You can launch it from the toolbar with "Robocode app" and press the "play" button for running Robocode or the "bug" button for running Robocode in debugging mode. |
| − | * Maven ([http://maven.apache.org/guides/getting-started/maven-in-five-minutes.html Tutorial])
| |
| − | * Eclipse IDE ([http://www.vogella.com/articles/Eclipse/article.html Tutorial])
| |
| | | | |
| − | Notice that you do not have to be an expert in Git/GitHub, Maven, or Eclipse. But you need some basic knowledge about these tools to understand how to build Robocode. In fact, trying to build Robocode might actually be a very good way of learning these tools, if you don't know them already or miss some practical experience with these. :-)
| + | [[File:Run Robocode app.png|Run Robocode app from IntelliJ]] |
| | | | |
| − | Eclipse is not required for building Robocode, meaning that you are free to use any IDE of your choice. However, all set up for building Robocode has primarily been focused on Eclipse, and the same goes for this guide. If you manage to setup Robocode for e.g. IntelliJ IDEA or any other IDE, you are welcome to write a guide for how to set up Robocode for your particular IDE as other developers might be very interested in using the same IDE.
| + | === Build the Installer for Robocode === |
| | | | |
| − | All sources of Robocode are available at [https://github.com/robo-code/robocode GitHub]. At GitHub, you can download sources as a zipped file or create your own [https://help.github.com/articles/fork-a-repo fork], if you want to.
| + | You build the Robocode installer (setup file) using Gradle from the command line: |
| | | | |
| − | In order to get build Robocode, Maven must be installed on your system. At present day, Maven 3.5.4 is the newest version and is able to build Robocode. Read more about how to install Maven [https://maven.apache.org/install.html here]. Note that the [https://github.com/takari/maven-wrapper Maven Wrapper] is being used by Robocode. Hence, you must run this Maven command from a command prompt or shell inside the your root directory for Robocode:
| + | ./gradlew build |
| | | | |
| − | mvn -N io.takari:maven:wrapper -Dmaven=3.5.4
| + | Gradle puts the installer into /build/robocode-x.x.x.x-setup.jar |
| | | | |
| − | This will create the Maven Wrapper files for you guaranteed to run as Maven version 3.5.4, even if you might have a newer Maven installed on your system. You'll get a directory named ".mvn" and these two script files "mvnw" and "mvnw.cmd". You build Robocode by using the mvnassembly.sh or mvnassembly.cmd files, which makes use of the Maven Wrapper.
| + | === Setting the version of the Robocode application === |
| | | | |
| − | You don't have to worry too much about how to set up Eclipse for Robocode as the provided sources contain all configuration files needed for Eclipse. Some of these files are generated using Maven's built-in support for Eclipse. However, you will need to do some basic pre-configuration of Eclipse before you'll be able to get started with working on Robocode. You should only need to set up a workspace for Robocode once. However, you will need to update the sources from the remote repository on GitHub once in a while, and merge changes with your sources in order to keep up-to-date with the current versions of Robocode, i.e. the origin/head of the Robocode sources.
| + | The version of Robocode can be changed in this file: |
| | + | \buildSrc\src\main\kotlin\net.sf.robocode.java-conventions.gradle.kts |
| | | | |
| − | === Getting sources from GitHub ===
| + | Look for a line like this: |
| | | | |
| − | In the following, I assume that you want to '''Git clone''' the sources from GitHub using a [http://git-scm.com/downloads Git client]. This could be one of the Git GUI Clients (git-gui) recommended [http://git-scm.com/downloads/guis here].
| + | version = "1.9.4.2" |
| − | You don't necessarily need a Git client for building Robocode, as you could simply download the sources as a plain .zip file from either [https://github.com/robo-code/robocode/archive/master.zip GitHub] or [https://sourceforge.net/projects/robocode/files/robocode%20sources/ SourceForge]. However, if you want to regularly update your local source files with the newest sources from the Git repository and the ability to commit and/or merge or fork changes, you will need to use a Git client.
| |
| − | | |
| − | The URL of the sources at GitHub is:
| |
| − | [https://github.com/robo-code/robocode.git https://github.com/robo-code/robocode.git]
| |
| − | | |
| − | ==== How to build distribution files? ==== | |
| − | | |
| − | In order to build the distribution files containing the installer setup file (robocode-x.x.x-setup.jar) and a .zip file containing all the sources (robocode-x.x.x-src.zip) you must call the '''mvnassembly''' script from the command-line when standing within the root directory of the Robocode sources.
| |
| − | | |
| − | On Windows:
| |
| − | mvnassembly
| |
| − | | |
| − | On *nix:
| |
| − | ./mvnassembly.sh
| |
| − | | |
| − | This will build the distribution files, which will be put into the sub-directory named ''robocode.distribution/target''.
| |
| − | | |
| − | '''mvnassembly''' is a script that compiles all sources of the Robocode game, creates javadoc html files, run test units, and finally creates the target distribution files. The first time this script is run, it will need to download a huge amount of .jar files from various Maven repositories and which contains Maven plugins etc. used for building Robocode. So please be patient with it the first time.
| |
| − | | |
| − | === Setting up Eclipse for developing on Robocode ===
| |
| − | | |
| − | Here follows a description of how to setup Eclipse for developing on Robocode.
| |
| − | | |
| − | ==== Software Requirements for Eclipse IDE ====
| |
| − | | |
| − | Here follows the recommended software needed to start developing on Robocode with the Eclipse IDE:
| |
| − | | |
| − | '''Required:'''
| |
| − | * Oracle JDK 6 ([http://www.oracle.com/technetwork/java/javase/downloads/index.html download]) must be pre-installed.
| |
| − | * Eclipse IDE for Java Developers([http://www.eclipse.org/downloads/ download]). The Juno, Kepler, Luna works fine for Robocode and supports Git.
| |
| − | | |
| − | Please consult the [http://wiki.eclipse.org/Eclipse/Installation#Install_a_JVM installation notes] provided for Eclipse in order to find out how to install Eclipse for your specific OS.
| |
| − | | |
| − | ==== Create a workspace for Robocode ====
| |
| − | | |
| − | When you have setup and installed Eclipse on your system (if you did not have it on your system already), a workspace must be created for Robocode.
| |
| − | | |
| − | The first time you start up a newly installed Eclipse, it will ask for a directory for your workspace. I suggest that you create a workspace named '''robocode-workspace''' or similar and create the workspace on a partition or directory like e.g. <code>C:</code> (on Windows) or <code>~</code> (on Linux) - or any other directory of your choice. If you have already got a workspace, e.g. the default one suggested by Eclipse, you can create a new workspace if you wish by selecting 'File' -> 'Switch Workspace' -> 'Other...' from the menu.
| |
| − | | |
| − | ==== M2_REPO class path variable ====
| |
| − | | |
| − | One of the first things you need to do in Eclipse is to set up the '''M2_REPO''' class path variable for Eclipse, which points to your local Maven 2 repository. That is, Eclipse uses the M2_REPO class path variable for locating the Maven repository containing various libraries used for compiling Robocode etc. But before you can setup the M2_REPO class path in Eclipse, you must run the 'mvnassembly' command described earlier if you have not already done that.
| |
| − | | |
| − | When calling the 'mvnassembly' script or alternatively start off Maven within the root of the robocode sources by calling e.g. 'mvn clean install', Maven will download all required libraries from other sites into your local Maven repository. Note that you will need to locate your local Maven repository. Under Windows your Maven repository is put into your %USERPROFILE% directory, and on Linux is put into your home directory (~). The Maven repository will be put under .m2/repository.
| |
| − | | |
| − | To setup the M2_REPO class path in Eclipse, you must go to the menu bar and select 'Window' -> 'Preferences'. On the Preferences window expand the 'Java' -> 'Build Path' and select the 'Classpath Variables'. On the page for the Classpath Variables, you click on the 'New...' button, and enter M2_REPO as name. Next, you click on the 'Folder...' button and navigate to where you have your .m2/repository directory located (in %USERPROFILE% under Windows, and ~ under Linux), e.g. <code>C:/Users/Flemming/.m2/repository</code> (Windows) or <code>/home/fnl/.m2/repository</code> (Linux).
| |
| − | | |
| − | When Eclipse asks you if it should rebuild the workspace, you select 'Yes'.
| |
| − | | |
| − | ==== Configure JDK for your workspace ====
| |
| − | | |
| − | You must setup which JDK that will be used for compiling (and running) Robocode in your workspace.
| |
| − | You do this by...
| |
| − | # selecting Window -> Preferences from the menu, and then unfold and select Java -> Installed JREs and press 'Add...' on the 'Installed JREs' page.
| |
| − | # Select 'Standard VM' on the 'JRE Type' page and press 'Next >' or Enter.
| |
| − | # Press the 'Directory...' button and browse to where you have installed your JDK 6 and press 'Finish' or Enter. Make sure to select a JDK and ''not'' a JRE, as a JRE is not sufficient as it lacks the tools available with the JDK.
| |
| − | # When you get back to the 'Installed JREs' page, make sure to put a check mark in the JDK you just added and press 'OK' or Enter.
| |
| − | | |
| − | ==== Importing sources of Robocode using Git ====
| |
| − | | |
| − | Importing the projects for Robocode into Eclipse from Git can be done from the Package Explorer, which can be opened from the menu by selecting Window -> Show View -> Package Explorer or by using the keyboard shortcut by pressing Alt+Shift+Q and P. In the Package Explorer, you...
| |
| − | | |
| − | # Right-click the mouse and select 'Import...' in the popup menu that occurs.
| |
| − | # Unfold 'Git' in the 'Import' window and double-click 'Projects from Git'.
| |
| − | # On the 'Import Projects from Git' you select 'URI'.
| |
| − | # On the next page named 'Source Git Repository' to enter '''https://github.com/robo-code/robocode.git''' into the 'URI:' text field and press Enter or 'Next >'.
| |
| − | # On the 'Branch Selection' page you press 'Deselect All' and select the branch you want to work on. This would normally be 'master', which is the master branch of Robocode. When the branch selection is made, you press 'Next >' or Enter.
| |
| − | # On the 'Local Destination' page, you must note the directory where your local files will be put. I recommend you use the directory suggested by Git (Eclipse) and press 'Finish' or Enter.
| |
| − | # On the 'Select a wizard to use for importing projects', make sure 'Import existing projects' is selected and press 'Next >' or Enter.
| |
| − | # On 'Import Projects', you should deselect the first project named 'plugins' as you would normally not want to develop on plugins for Robocode - otherwise just omit deselecting 'plugins'. Press 'Finish' or Enter.
| |
| − | # All Robocode projects will now be imported into Eclipse and be visible in the Package Explorer.
| |
| − | # Now, select all projects (press Ctrl+A) and right-click the Package Explorer and select Replace With -> HEAD Revision on the popup menu that occurs, and press 'OK' or Enter to discard local changes on the dialog that appears.
| |
| − | | |
| − | Congratulations, you should now be able to get started working on the Robocode sources in Eclipse. :-)
| |
| − | | |
| − | ==== Launch Robocode ====
| |
| − | | |
| − | Before launching Robocode for the first time, you should make sure that it is cleaned and compiled first. You do this by selecting Project -> Clean... from the menu. You should also make sure that you have run the 'mvnassembly' described previously, which will download and update your local Maven repository, which is necessary for compiling and running Robocode.
| |
| − | | |
| − | Please notice that it might be necessary to refresh the sources in Eclipse when files are changed outside the Eclipse editor, which is the case when running the 'mvnassembly' script. You can do this from the Package Explorer by right-clicking in this and select 'Refresh'.
| |
| − | | |
| − | In order to start running or debugging Robocode, you should select the "Bug" (debug) or "Play" (run) button in the top of Eclipse under the menu. You should press the little arrow beside these green buttons in order to choose among: Robocode, RoboRumble, TeamRumble, and MeleeRumble. The 3 last ones are for running the RoboRumble@Home clients.
| |
| − | | |
| − | ==== How to run the unit tests? ====
| |
| − | | |
| − | When you want to run the unit test from within Eclipse, you must do this from the the Package Explorer, where you right-click on the 'robocode.tests' project and select 'Run As' -> 'JUnit Test'. Now all available unit tests will run automatically.
| |
| − | | |
| − | Alternatively you can start the tests from the command-line by standing on your robocode workspace, and write the following Maven command.
| |
| − | | |
| − | On Windows:
| |
| − | mvn test install
| |
| − | | |
| − | On Linux:
| |
| − | ./mvn.sh test install
| |
| | | | |
| | === Robocode developers and contributions === | | === Robocode developers and contributions === |
| | | | |
| − | Robocode developers have discussion group at robocode-developers@googlegroups.com. Everybody interested in discussion about future of Robocode are welcome. We also welcome your contributions there. The discussion group is located here: http://groups.google.com/group/robocode-developers. | + | Robocode application developers have a discussion group [http://groups.google.com/group/robocode-developers here]. Anybody interested in a discussion or advice about contributing with a feature or modification for Robocode is welcome to this group. |
| − | | |
| − | == See also ==
| |
| − | * [[Robocode/Old Developers Guide for building Robocode|Old version]] of the Developer's Guide for building Robocode for Robocode versions prior to version 1.7.
| |
| − | * [http://code.google.com/p/robocode/source/browse/ Browse the sources] of Robocode.
| |
| − | * [http://sourceforge.net/project/showfiles.php?group_id=37202&package_id=218677 Download the sources] of Robocode.
| |
| − | * [http://groups.google.com/group/robocode-developers Robocode developers discussion group].
| |
| | | | |
| − | == References ==
| |
| − | * The [http://sourceforge.net/projects/robocode Robocode project] on SourceForge.
| |
| − | * [http://sourceforge.net/svn/?group_id=37202 How to access] the SVN Repository for Robocode.
| |
| − | * [http://www.eclipse.org/ Eclipse] - an open development platform supported by Robocode.
| |
| − | * [http://maven.apache.org/ Apache Maven] used for building Robocode.
| |
| − | * [http://maven.apache.org/guides/mini/guide-ide-eclipse.html Guide] to using Eclipse with Maven 2.x.
| |
| − | * [http://www.eclipse.org/subversive/ Eclipse Subversive] is a plugin used for accessing Subversion from Eclipse.
| |
| − | * [http://subclipse.tigris.org/ Subclipse] is also a plugin used for accessing Subversion from Eclipse.
| |
| − | * [http://tortoisesvn.net TortoiseSVN], a Subversion client for Windows.
| |
| − | * [http://www.open.collab.net/downloads/subversion/ CollabNets Subversion], a Subversion client for both Windows and Linux.
| |
| | | | |
| | [[Category:Robocode Documentation]] | | [[Category:Robocode Documentation]] |
| | [[Category:Eclipse IDE]] | | [[Category:Eclipse IDE]] |
This guide describes how to build the Robocode application, i.e. the game itself.
Developer's Guide for building Robocode with IntelliJ IDEA setup
Notice
This guide is intended for experienced Java developers, who want to work on the Robocode application, and describes all the basic stuff required to compile and run Robocode within IntelliJ IDEA.
If you just need to study the sources, you can do it from GibHub, where it is possible to download the source code as a zip file under 'Code'.
Requirements
To get started with building Robocode you need:
- An Internet connection, as Robocode has dependencies to libraries that are available on public binary repositories.
- Git
- IntelliJ IDEA
- JDK 8, e.g. AdoptOpenJDK 8
Note that JDK 8 is required for Robocode to ensure all binaries can run on Java 8. If you build a customized version of your own, you are of course free to use a newer JDK version. But notice that the build tools might not be work with newer Java versions. So you'll need to fix this by yourself.
Make sure that your JAVA_HOME and PATH is set up to use the JDK 8 when building the Robocode application. There is a good guide here.
Cloning the Robocode project
You need to download the source files for the Robocode project into your PC using Git with this command line:
git clone https://github.com/robo-code/robocode.git robocode-proj
This downloads the Robocode source files into a directory named 'robocode-proj' into the current directory.
Building the Robocode application
Robocode is built by running using Gradle standing in the 'robocode-proj' directory:
./gradlew build
This step is required to easy importing the project into IntelliJ IDEA, but also the quickest way to build and test Robocode.
Setup Robocode for IntelliJ
First, open the 'robocode-project' directory in IntelliJ.
Secondly, set the JDK for the Robocode project, which needs to be JDK 8.
From the menu, select:
File > Project Structure | Platform Settings | SDKs > + (plus sign) > Add JDK
Select the home directory of your JDK 1.8 installation.
The last step is to align IDEA with the Gradle setup. You do this by running the 'Reload All Gradle Projects', which is available by pressing the "refresh button" with the Gradle tool window in its top-left corner.
Run the Robocode application
You can run or debug Robocode as soon as Robocode has been set up in IntelliJ. You can launch it from the toolbar with "Robocode app" and press the "play" button for running Robocode or the "bug" button for running Robocode in debugging mode.
Build the Installer for Robocode
You build the Robocode installer (setup file) using Gradle from the command line:
./gradlew build
Gradle puts the installer into /build/robocode-x.x.x.x-setup.jar
Setting the version of the Robocode application
The version of Robocode can be changed in this file:
\buildSrc\src\main\kotlin\net.sf.robocode.java-conventions.gradle.kts
Look for a line like this:
version = "1.9.4.2"
Robocode developers and contributions
Robocode application developers have a discussion group here. Anybody interested in a discussion or advice about contributing with a feature or modification for Robocode is welcome to this group.
