View source for User talk:Chase-san/Roboflight

/Archived Talk 20130214

Sorry for the todo list. If I don't have it somewhere very visible, I will likely muck around in the parts of the program that are least important.

I figured I should try and get some input from other robocoder on this game.

I was wondering about thrust. Should be constant: If you set it to [1,0,0] it will remain that until you change it. Should it zero out: If you set it to [1,0,0] it will apply that thrust and then zero out the next turn. Should it deplete: If you set it to [1,0,0] it will apply that thrust and be reduced by however much was used (based on maximum thrust).

Currently it zero's out, and depleting thrust would be more similar to robocode, and would also allow you to set it to the inverse of your velocity to have your robot come to a stop without having to set it again.

That is assuming of course I do not add some kind of drag. I kind of like the frictionless feel of the current simulation, but that doesn't mean everyout has to agree with me on that front.

The missiles are the most difficult. I want to make them versatile but not too versatile/dangerous.

I figure there are two things, Yield and (possibly) Fuel. Unlike bullets, I would want them to be detectable by radar. But I also want the robot to be able to control them (this is simple enough). But I want them to possibly be able to stop and act as mines (and disappear from radar). But they would be easy enough to avoid in theory if the enemy just memorizes the position they were last at. But I also want them to possibly just disappear at some random point in the field (to the robots) without that area being considered dangerous. I think bullet missile collision might be the best way to achieve this. But that would only work if there were more then 2 opponents (since if you didn't shoot it, and your enemy definitely didn't then it must still be there). Etc ad nauseam

So any thoughts?

I like zeroing out thrust every turn. My feeling is this is both the simplest model and the one that any moderately advanced bot will use anyway (most Robocode bots recalculate movement every tick), so why not keep your API simple and make it the only model.

My first thought is that drag sounds not fun and not that interesting a problem either, but there are good reasons you might want it - e.g., to keep max speeds in check, if you think that would be good for gameplay.

Your thoughts on missile behavior sound interesting and like a big change from Robocode, which is cool. Will there be any limit to what you can see on radar - e.g., walls obstructing it, distance, etc? That would play interestingly into the invisible mine thing, like being able to move your stuff around when you think the enemy can't see it. Incomplete information is a pretty powerful gameplay dynamic, and without it you risk creating a "solvable" game, especially with computer players.

I think my biggest advice is to be vigilant about only adding complexity that really multiplies the gameplay depth. I posted a bunch of thoughts about this in BerryBots vs Robocode game rules.

Chess is a good example of a game that probably gets it just right. Each type of piece multiplies the complexity, and the result is a game where the greatest human minds, with tons of practice, can almost play it perfectly. Any more pieces and it would become too complex and even less approachable, and any fewer pieces and it probably would have become uninteresting ages ago.

I was only referring to only one kind of movement, I was asking an opinion on which one in particular.

You have an interesting point. The 3D by itself already makes the game fairly complex. However compared to the original version it has been greatly simplified.

Currently the radar is an 'all seeing eye'. It can't see bullets, but I could see it being blocked by a robot, since missiles are 1/3 the size of the robots that fire them. So an enemy could fire a missile opposite of the enemy, cover it till it stops and then lure the enemy towards it, or wait for them to approach it, and reactivate it, or possibly several to flank an enemy with mines.

That actually sounds awesome, and as long as missiles/mines are not one hit wonders, it should work wonderfully. I think 8-16 damage (4-8 to fire), with a limited fuel supply is best. I don't want it to overlap with bullets, which at the moment cost 0.5, and do 2 damage.

Though I think limiting the number of active missile a robot can have might also be an good idea. But that requires a way to disable them, or rather remove them from your control so you can fire another. But perhaps they could still work as passive mines.

On the note of missiles, since they can navigate. I think you should be able to hit yourself with them (after a few ticks to activate).

After much consideration I decided to go with depleting thrust, so that you can do things like this.

//Lay a mine
Missile m = setFireMissile(new Vector(1,0,0));
if(m != null)
	m.setThrust(m.getVelocity().scale(-1));

or this

//thrust towards center for 4 turns
setThrust(getPosition().normalize().scale(-4));

This will allow smaller robots by making the thrust system easier for robot creators to use, while not impacting those who want to change it every turn. If you set a thrust, it replaces the current thrust, just like calling setAhead(-100) replaces the previous setAhead(100) call.

In general, I think anything that simplifies the 3Dness is a good idea. I feel like even the trig required for Robocode-like games is a barrier to entry for many folks, and 3D makes that even tougher.

I was actually just thinking about this re: Roboflight the other day. For instance, Quake brought "true 3D", but the gameplay was not dominated by it. Something like Descent was totally 3D, which was pretty cool, but also a bit jarring.

Glad to hear it. It actually simplifies the engine a bit too. Of course I still had to muck about in rotations for the camera. But I see no reason why I should force quaternions on anyone else.

Here is a small sample I did using the current (revised) api. It is basically the RF version of walls. What is more, not a 3d rotation in sight.

https://gist.github.com/Chase-san/4132e0696156d64ca7c5

Saw Roboflight for the first time now. Interesting concept.

I would like if robots mimic some kind of air/space vehicle people are familiar with. Like Robocode robots mimic tanks.

It is kind of shocking how many programming games stick with tanks. I can appreciate keeping it simple - manually controlling a real aircraft in 3D would be pretty challenging, before even getting to any strategy or learning. But I'm sure controlling a real tank would be challenging too.

Maybe helicopters? But I don't know where thrust would fit.

Actually I sort of made it kind of a zero-g 3D based system. The old version was going to be an actual flight based system, I even had front-back, rotation and so forth.

But I decided for a game that is suppose to be fun to play, that it wouldn't be with that. I removed all concept of front, back, top, bottom, left and right to simplify things.

Something I realized in hindsight with BerryBots is that a simpler API doesn't necessarily mean that it's simpler for the client of the API. In many cases, even the opposite. Consider that the "API" (instruction set) of a CPU is a hell of a lot simpler than the Java API, but for any real application I'd much rather be working with the latter. I kept the movement API in BerryBots to a single method to fire a thruster that alters your trajectory, but as a consequence you have to kind of understand vectors to make full use of it.

I'm not saying that you should make a user deal with complex 3-D physics or anything, just that there's a sweet spot.

Well I think vectors is the simplest way to approach 3D movement unfortunately. Though I could make it more like Robocodes movement, where you only move the distance you specify (in a vector).

I threw this up on GitHub (finally), so if your interested you can browse the code at your leisure. I know I can't usually be bothered to download things to look at the source, so why would anyone else?

Enjoy, I may continue working on this soonish.

Haven't browsed much yet, but wanted to say congrats on the milestone anyway. :-)

There isn't much there yet. But in a few milestones people might be more interested.