Garbage Collection and Skipped Turns

Starting a new thread to discuss my efforts to deal with the skipped turn issue that is apparently related to garbage collection eating up allowed run time. This was previously discussed in thread "Shielding Success Rates Mystery", for anyone who wants to see where it all started.

I purposely did not contribute to the rumble over the last few days after the pairings for XanderCat 12.6 were lost. I originally ran many of the original pairings on my PC that does not have the skipped turns issue. Most of the re-run pairings were likely run by Voidious, whose system does exhibit the skipped turns issue.

The difference between the two is quite significant. With clients that don't exhibit the skipped turns issue, XanderCat achieved an APS of 87.7. With clients that do exhibit the shipped turns issue, XanderCat achieved an APS of 86.5. The difference -- 1.2 APS -- is quite significant. With the current rumble participants, it makes the difference between 5th and 8th place.

Most of the difference is due to the skipped turns causing the bullet shielding system to fail much of the time. But likely the skipped turns in general -- ignoring the bullet shielding -- also contribute a small amount.

I had previously fixed a few performance bottlenecks to make XanderCat run quite a bit faster (v 12.3), with much lower turn time peaks, but this only achieved a marginal improvement. I now need to shift to figuring out how to reduce the amount of garbage my framework apparently creates. This is not a real easy problem to address, because it is a very unique Java problem that rarely ever needs to be addressed in the real world, so there is not a lot of information or research available online to help on this.

I think one thing I can do is to eliminate as many intermediate local variables as I can. For example, variables with only method scope that are used to break something into multiple easier to maintain steps. These extra method scope variables may be contributing to the garbage collection, especially in the first round. Eliminating them may help to fix the problem, but at the expensive of either combining multiple lines together into more complex lines or making the variables have a wider than necessary scope (declaring them as part of the class), thus eating more memory overall but eliminating the possibility of it triggering garbage collection.

I don't know if these steps will help, but I will probably give it a try. I am also not sure if there are other ways to reduce garbage collection, but maybe I will come across some other ideas. I may actually create a second branch in my source tree for this work, something I never thought I would do for Robocode. I want to keep the current version, as I think it will constitute better code and perhaps someday the garbage collection issue will be addressed by changes to Robocode itself; but if my garbage reduction efforts work, for now I will operate off of a garbage reduced branch.

This seems like a really crappy thing to push onto you as a bot author. I do think our time is probably better spent coming up with a proposal to change Robocode itself and submitting that (as idea, design, or code) to Fnl. There could be a very simple and elegant solution that would work, like "allow 10x the CPU constant for the first 100 ticks". (Disabling CPU limits in first 100 ticks seems problematic, since you want to at least interrupt bots that hit infinite loops.) Another idea is having Robocode run its own GC cycle right before the match starts, in case bots are being penalized for GC of the game engine.

I'll try to get to another round of tests and find out how much I need to raise the CPU constant to get normal performance out of XanderCat.

I've had to deal with this quite a bit when writing games in c#. Similar to Java the GC can case obvious stalls. The easiest way is to stop calling the "new" function at run time by using pooling. For instance at the start of a match, or a round create a container object which contains N pooled objects which you know you create often, eg wave objects. At the point you wish to use one, take it from the pool, initialise it, use it, then return it to the pool when finished at any point later on.

Because you have not called new, and then nulled the object, the memory used does not go up, it stays constant, thus no GC is run. It's obviously impractical to pool everything so you just do the worst offenders which are things that you create often and throw away.

That seems like a great approach. And you can even create the pools in a static block, which I'm pretty sure runs before the match starts and won't count against any of your CPU time.

Speaking of static blocks, I've noticed that they get run on Robocode/rumble startup for every single bot, which is partly why it takes so long to start when there are lots of bots in the /robocode/robots directory. I also suspect that code in static blocks isn't subject to the security manager, since it can print to the main console. Does somebody feel like writing a test bot to see if this theory is correct?

Local variables are stored in the stack and not the heap, so they don't affect garbage collection.

You should look after "new" abuse, like Wolfman said. Although sometimes the instantiation is implicit and simply searching for the "new" keyword doesn't always work.

There are heap profiling tools which locate automatically where too many objects are being instantiated.

Local variables are stored on the stack but any time you use new it will go on the heap afaik:

public void MyFunc(Object a) {

  Object b = a; // Variable b is on the stack, pointing at a.
  b = new Object(); // Memory allocated on heap, referenced by variable b on the stack

}

This is my understanding of it. Please correct me if I am wrong!

This is correct.

My understanding of the snippet above is that you have 3 variables. 2 in the stack (references "a" and "b") and 1 in the heap (Object instance).

Some variables stay in the stack only, like primitives (double, float, int...).