View source for User talk:Rednaxela/kD-Tree

So this mean I can use it int close-sourced robot? » Nat | Talk » 13:24, 25 August 2009 (UTC)

Yep, so long as you don't misrepresent it's origin (i.e. claim you wrote the kd-tree in use) :) --Rednaxela 13:29, 25 August 2009 (UTC)

You used to say that it will be licensed under RWPCL and CC-BY, but I'm more happy with this though, for that I can release the code under more tricky way than usual in-jar method =) » Nat | Talk » 14:25, 25 August 2009 (UTC)

I decided I wanted to avoid as much complication as possible, and I found the zlib licence. Since I don't mind how people use it so long as they don't make false claims to have written it, and it doesn't conflict with the RWPCL (i.e. can be used in RWPCL bots), it seemed like a good match. I removed one clause that I deemed unnecessary. It seems reasonable to me :) --Rednaxela 14:46, 25 August 2009 (UTC)

I just tried this tree, and I'm getting problems where every now and again an Entry will have a null value in it. I've got workaround code for it, but I know it shouldn't be doing that, and I'm not sure why it is. Also, DrussGT is still skipping a LOT of turns with this tree, so I'll have to find a dimension or 3 to cull... I could even run 2 trees with 8 dimensions in less time than my 1 tree with 11. Oh yes, I changed the 2 distance functions to be Manhattan distance, but that shouldn't affect things too much. --Skilgannon 18:21, 26 August 2009 (UTC)

Huh... that seems odd. I don't see why null entries could ever happen, I'll look into it when I get home. As far as DrussGT skipping a lot of turns still, I assume you don't mean any turns than normal do you? And yeah, even a few dimensions will make a huge difference with any kd-tree. --Rednaxela 18:33, 26 August 2009 (UTC)

Yeah, I know it passed all the benchmarks etc. so I'm not sure what's going on. Maybe look in DrussGT 1.3.10wilo for the version I'm using if you want to test it. Lines 614 to 618 of DrussGunDC.java are where my workaround is (basically just removing all Entries with null values from the cluster). If I take that out it starts throwing errors every few rounds. (Note: just to prevent any confusion, due to me adding the first workaround - just skipping null values in the loop - it now throws the errors down on line 663 when it sorts the Indices instead of in the loop when trying to access the data inside the null value). Thanks for any light you can shed on this =) --Skilgannon 18:55, 26 August 2009 (UTC)

Aha! I haven't tested it yet, but this should fix the nulls. :) --Rednaxela 19:23, 26 August 2009 (UTC)

Oh, and also, this bug may do more than cause nulls: It may cause duplicate entries in some cases I suspect, so it may affect the results of jk.mega.DrussGT 1.3.10wilo. I don't think it wouldn't affect the results of RougeDC willow though because I'm pretty sure that bug was introduced after. --Rednaxela 19:29, 26 August 2009 (UTC)

I believe I have found the following problem, Arrays.copyOf is only supported since Java 6.0, so your code can't be compiled/run under earlier versions of Java. --Positive 22:49, 27 August 2009 (UTC)

Haha, Fnl also noticed that earlier today. Fixed and tested to have no/negligable affect on performance :) --Rednaxela 00:10, 28 August 2009 (UTC)

Hey Rednaxela, good job! One thing that you might improve the speed on (if I understand your tree correctly) is the sqrPointRegionDist function. You don't need to recalculate all distances between bounds and the point, only between the *changed* bound since last check. If that makes sense. :) Also, I think it would be nice to have another version of the tree which doesn't apply weighing while searching. In any case, it's a very nice piece of code, and I'm going to try to use it in Portia (thanks to your license!). :) --Positive 21:45, 27 August 2009 (UTC)

Hmm... you're right, that is an optimization that could be done, that is, if the overhead of caching it doesn't outweigh the benefit. I think in order to implement that I'd need to either store temporary values in the nodes, or maintain a third stack that remembers the distance of it's bounds. I'll give it a try and keep that change if it's worth it, haha. As far as a version that doesn't apply weighting, I've considered that however decided it was simpler to maintain a single version. If you want to remove the weighting capabilities, all it takes is 1) Removing the 'weights' variables where they are declared, 2) Removing the reference to them in the distance functions, and 3) Remove the couple statements that set it. Though, I suppose that if changes to the tree cease to happen for a long time I'll post the version with weighting removed as well, I just don't want to be worrying about them getting out of sync while it's in (semi-)active development. Anyways, I'm glad it's liked :) --Rednaxela 00:10, 28 August 2009 (UTC)

Okay, that makes sense. I have some other feature requests: A size() function to keep track of how many entries there are in the tree, and it'd be cool if there was something to make sure the size stays below a certain point. A possible problem might be the line with tree.weights = weights;, because it doesn't reset the weights afterwards. Also, I'd selfishly like the addPoint functions and such to be nonstatic and without the KdTree<T> tree parameter (but I suppose that is a matter of taste). :P --Positive 01:03, 28 August 2009 (UTC)

Keeping the weights across calls I considered desired, but it was a bad API for it. It's now split into a setWeights() call. Haha, I don't know what I was thinking when I made the addPoint and nearestNeighbours functions static, I was in a strange mindset when I first wrote this beast. They're now non-static and tested to have no impact on performance. I'm not sure what you mean by "make sure size stays below a certain point". Do you mean removing old points? --Rednaxela 03:39, 28 August 2009 (UTC)

Great. :) Yes, that's exactly what I meant. It seems usefull and safe to have some kind of deletePoint function and perhaps a built-in linked list system to remove old entries, so that the data stays up to date & won't eventually fill up the memory. --Positive 03:48, 28 August 2009 (UTC)

Well... support for an optional limit on size is now supported. Deleting arbitrary points however, is not supported, because that would conflict with the size limit since it would be far too painfully slow to remove that point from the linked list that tracks the the order that points were added in. Also, to make sure this doesn't impact speed normally, that list is never even created if no limit was specified. Anyways, the size of the code is getting closer to 500 lines than I'd like it to, so I think this is enough non-optimization features for any sane usage of it. --Rednaxela 04:45, 28 August 2009 (UTC)

I don't know if this is standard or not, but it seems strange that the constructors isn't the very first method in the class. And the method/sub-class ordering is more like... DrussGT's =) They are now ordering by the time you added the code and where, aren't they? I know it isn't going to improve the execution speed, but... » Nat | Talk » 14:40, 28 August 2009 (UTC)

Nah, not ordered by the time added at all. At one point I had the functions for 'bounds' grouped beside the variables, but they kind of drifted apart. There wasn't any real reason for the ordering except that nearby things often had some relevance to eachother. Reformatted that a bit now as to be saner and maintain that relevance-ordering :) --Rednaxela 14:56, 28 August 2009 (UTC)

I've been testing with the pre-limit version of your tree in Portia, and it seems to be working. :) Now with your new version, I do get an error at line double[] location = this.locationStack.pop();: (The method pop() is undefined for the type LinkedList<double[]>). --Positive 15:53, 28 August 2009 (UTC)

Ugh... Any reason why you're on ancient Java 5? Anyway, that method in LinkedList only exists in 6 not 5. Making it Java 5 compatible again... --Rednaxela 16:11, 28 August 2009 (UTC)

Haha, actually I'm on Java 6. I compile everything using the Java 5 library though, so I know for sure I don't make code that's not Java 5 compatible. :) --Positive 16:14, 28 August 2009 (UTC)

Warning! Rounding Errors!

Argh! It seems rounding errors are evil! Evil evil evil! I was toying with my tree in a very lightly segmented gun where exact-same-locations will occur frequently and it did that stupid rampent/infinite branching again. The cause? It turns out to be rounding, indicated by this excerpt from some debugging messages.

...
Split Dimension: 1, Split Value: 1.0, Range: 0.9999999999999999 to 1.0, Width: -1.1102230246251565E-16
Split Dimension: 1, Split Value: 1.0, Range: 0.9999999999999999 to 1.0, Width: -1.1102230246251565E-16
Split Dimension: 1, Split Value: 1.0, Range: 0.9999999999999999 to 1.0, Width: -1.1102230246251565E-16
Split Dimension: 1, Split Value: 1.0, Range: 0.9999999999999999 to 1.0, Width: -1.1102230246251565E-16
Split Dimension: 1, Split Value: 1.0, Range: 0.9999999999999999 to 1.0, Width: -1.1102230246251565E-16
Split Dimension: 1, Split Value: 1.0, Range: 0.9999999999999999 to 1.0, Width: -1.1102230246251565E-16
...

When the only values in the dimension were 1.0, and just BARELY below it, the splitValue would be set to the average of those two values. Due to rounding errors, the average happened to be the same as the higher value... causing the tree to lump all values into the left child node and try branching again, and again, and again :(

So as a warning to those currently using the tree, this obscure sitaution could cause the tree to lock up... I'll release a fix soon --Rednaxela 00:54, 30 August 2009 (UTC)

• Simonton's fix to this was to only allow his tree a certain recursive depth (he used 500), after which it would start throwing away values. This way it was also (sort of) possible to have a tree with 'rolling averages' by setting the max recursive depth very low. However, it's more of a bandaid then a fix for the root of the actual problem. --Skilgannon 13:03, 30 August 2009 (UTC)

Well, this sucks, I thought I could fix it simply by making a > into a >= because I thought it always would round one way.... turns out it doesn't... it rounds whatever way it's in the mood for it seems.. bah. Oh and by the way ABC, curse Shadow for hitting such almost-1.0 velocitities as to cause rounding issues :P --Rednaxela 02:22, 30 August 2009 (UTC)

I'm sure there are lots of ways to deal with this, but just a comment on how my insert method handles a similar situation. Values less than the split go to the left, values greater go to the right, and values equal to the split go to alternating sides. One other implication is that when removing a node, you have to check both sides when the value is equal to the split value, but that's easy enough. --Voidious 02:33, 30 August 2009 (UTC)

I guess if you had 19 0.9999's and one 1.0 and it used 1.0 as the split, you'd still have this problem unless the first alternating side also alternated. So I suppose a different special case would probably work a lot better. Another thing that sucks about this, at least if you use the tree the way I do... Rounding every number to, say, 10 digits seems pretty reasonable, but I wouldn't want to do that either, because I count on the fact that the neighbors returned from the tree are the same exact objects I inserted. :-/ --Voidious 02:43, 30 August 2009 (UTC)

(edit conflict) I saw that alternating approach, but I really don't like that approach for several reasons. It increases the balance of the tree very slightly, but it comes at the cost of making each node wider than they need to be. Not only deletes have to search more nodes Voidious, but seraches as well. For example, presume a dimension only has values of 0.0, 0.5, and 1.0 and the first split in the tree is at 0.5. Then the full search has to be repeated completely on both sides, and thus could have a huge impact if such a split happens to be the first split in the whole tree. Anyways, I now have a fix, the solution is: If split value is equal to the maximum node value (will only occur if they're so close that no Double value between could exist), then it sets the split value to the minimum node value instead which guarantees some values will be put in each node. Extensive testing is showing this is working quite nicely :) --Rednaxela 02:48, 30 August 2009 (UTC)

Ah, cool. I agree it can unbalance the tree, but I don't think it makes searches any slower (otherwise). Mine definitely doesn't account for the equal-to-split edge case in its "findLeaf" - I recall thinking it would need to account for that, then realizing it didn't.

When coming back up the tree, you test if the other side of the tree could have a node with a distance to the search point that is lower than some threshold. Since the value could be infinitely close to the split value, you have to just assume it is the split value, right? So while you may take a wrong turn while descending the tree if you hit values equal to the split value, you'll check the other side on the way back up, which you're just as likely to have had to do anyway. In your example, you'd need to search the other side anyway - know what I mean? It's been a while since I wrote my tree, maybe I'm misunderstanding something... =) But I'm pretty sure it's just as accurate and just as fast for searches.

Deletes need to find an actual value that's already in the tree, though, which is a different scenario. (And I don't particularly care how fast deletes are.) --Voidious 03:11, 30 August 2009 (UTC)

Which reminds me, I actually wrote this case for another scenario, which might be a problem in your current solution, too: if all the nodes have the same value for the split dimension. --Voidious 03:19, 30 August 2009 (UTC)

I presume you mean all entries, not all nodes. In that case yes, I already deal with that case. I always set the split dimension to the widest dimension, and whenever "widest" is still 0 width, then it will simply double the bucket size for that particular node. My logic is that the scenario you describe could only happen with "split on widest dimension" when that all entries are in exactly the same spot, in which case there could never ever be any performance gain by putting them in seperate nodes. On a related note, one possible optimization I could also do with this, would be giving such nodes a special marking and avoiding redundent distance calculations in them. I haven't bothered with that yet though since I doubt it would occur often in practice with a well-segmented gun. --Rednaxela 04:51, 30 August 2009 (UTC)

Actually Voidious, in my tree checking the other side anyway wouldn't happen. I keep track of an extra-tight bounding box for each node and compare to that, and due to how my splitting doesn't alternate, the tight bounding box will never overlap on the split value actually. So.. you're right about some trees, but not my one :) --Rednaxela 04:51, 30 August 2009 (UTC)

I'm curious, why did you go with the MinHeap instead of the IntervalHeap for your path ordering? Surely IntervalHeap can be kept pruned and small, resulting in less overhead?

I hadn't actually thought to try that. The IntervalHeap is something I added specifically when I was thinking about implementing to search iterator, rather than optimizing the search steps themselves.

I just tried it right now. Turns out that the more complex procedure to maintain the IntervalHeap's ordering adds more cost than is saved by keeping the path ordering queue pruned, at least for this size of tree in the 'standard' data set.

I tried two seperate approaches of using the IntervalHeap to keep that queue pruned:

1. Remove any paths which are now known to be too distant, whenever we finish processing a leaf node (aka, always keep it pruned as much as possible)
2. When we're adding a new path to the queue, if the furthest path in the queue is too distant, replace it to avoid growing the heap (aka, don't actively prune it, merely don't grow it if we can avoid it)

Both approaches performed worse overall than the unpruned MinHeap. Even if I do a run with JIT warmup allowed to compensate for the IntervalHeap's more complex code, it still performs slightly worse on average. When the JIT warmup is allowed however, the "worst case" time appears to improve though, just not the average.

How about keeping a flag in your leaf node processing so that you only try pruning if you added a new item?

Just tried that. The pruning is still not paying off compared to the extra overhead of the IntervalHeap.

And how about if you just use the IntervalHeap, but don't try any pruning? I'm curious whether the pruning is slow, or the different heap.

I was thinking it was the different heap... but actually turns out the heaps are approximately the same performance, with the difference being the pruning:

 - #1 Rednaxela's kd-tree (3rd gen, Interval Heap) [0.0290]
 - #2 Rednaxela's kd-tree (3rd gen) [0.0290]
 - #3 Rednaxela's kd-tree (3rd gen, Interval Heap, Prune When Points Added) [0.0293]
 - #4 Rednaxela's kd-tree (3rd gen, Interval Heap, Avoid Growing Heap When Possible) [0.0294]
 - #5 Skilgannon's Cache-hit KDTree [0.0296]

I've added this KD-tree to my bot as I do a ground-up rewrite of it. I'm not even to the point of extracting k.n.n. data from the tree yet, I was just in the process of testing dropping data into the tree, and noticed something odd. The tree isn't pruning when locationCount exceeds sizeLimit. Or if it is, then it's not being reflected in the value of locationCount.

I've set sizeLimit in the tree instantiation to a mere 35 as a test, and by the end of a 35 round match against Walls, the tree reports containing nearly 2000 nodes. After reading through the code, I don't see a lower bound on pruning the tree other than bucketSize, which is only 24 anyway. I've added a debug print message, and removeOld() is definitely being called, but is returning before the "weird" comment at the end of that method....

I'm sure I'm missing something... but what? Should I presume this is working as intended, despite the reported size() growing without bound?

Okay. A bit of testing with grabbing knn's via nearestNeighbor() shows that even if I request more knn points than. sizeLimit, the function only returns <= sizeLimit points. Excellent! So, is it problematic that locationCount (and thus the output of size() )is going to head without limit for Integer.MAX_VALUE and never gets decremented to reflect the current actual size of the tree? The former isn't much of a concern, RC matches are never that long.. but the latter?

I found the error. In method RemoveOld, the loop condition of the decrementing loop should be

   cursor != null    // OK

instead of

   cursor.parent != null     // WRONG

This prevented the count in the root node of being decremented.

Whole loop (corrected):

   do {
       cursor.locationCount--;
       cursor = cursor.parent;
   } while (cursor != null);

---

Also RemoveOld does not adapt minLimit and maxLimit. I don't know what the impact of this would be in practice.

That works! Excellent! I'll edit the code on the page to reflect it.

Hey, thanks for finding that bug.

By the way, just so you know, the version with the code on the page is not the version I actively use anymore. The "up to date" version is here under the java package "ags.utils.dataStructures.trees.thirdGenKD". This version is a re-write what is cleaner (IMO anyway), slightly faster, though with a slightly different feature set. It's missing that "remove old elements beyond a size limit" feature because nobody I knew of was using it at the time, but it has some additional features like an iterator to allow one to iterate over the nearest points in sorted order, and if you stop early it saves a notable amount of cpu. The advantage of this iterator is that it can be significantly faster in situations where the number of points you need is uncertain until looking at the closest few points (i.e. if you're filtering out some of the points after the k-nn search based on some other criteria).

Hey Rednaxela,

I'm switching over to your 3rd gen tree, and had a question re: your statement here:

"... it has some additional features like an iterator to allow one to iterate over the nearest points in sorted order, and if you stop early it saves a notable amount of cpu."

How early are we talking about? For instance, if I grab an iterator for 200 maxPointsReturned, iterate over the first 150 of them and decide I'm done, is that still in the "saves a notable amount of cpu" territory?

I'd have to benchmark it to be sure, and it depends on the distribution of data of course, but I'd estimate stopping at 150 out of 200 points would shave off something like 10-15% of the search time compared to just getting 200 points.

IIRC it depends on the structure of your data. From what I understand, it slowly expands the hypersphere of contained points in bursts (grabbing further and further tree branches), sorting them in order of relevancy as it goes. It depends on whether you don't have to do an extra expansion to get the extra points. An iterator for 200, then getting 150, will be slower than getting an iterator for 150, but chances are it will be faster than getting an iterator for 200 and using all 200.

Pretty much yeah, though it does avoid the full effort of sorting them by using a min-max heap that tosses the most distant points off and keeps the closest point accessible in constant time. The search algorithm is exactly the same as searching for all 200 (it needs to remember the 200 closest points it's found so far, and know what the furthest and closest ones of that set are), except that it pauses the search when when it is able to determine that no unchecked branch could have anything closer than the closest point not yet returned by the iterator.

Excellent info from you both, thanks!

One more question: the DistanceFunction file defines an Interface, but features no comments to describe what the two member methods are supposed to do.

distance() is utterly obvious... especially when reading your EuclideanDistanceFunction implementation. But distanceToRect()... I think I know what it requires, but I don't want to screw it up when I write my own DistanceFunction.

What precisely is distanceToRect defined as?

It's the minimum distance from that point you are testing to the hyper-rectangle defined by the min and max co-ordinates on each dimension.

So considering dimension x: if the point val is less than the min, the distance is (min - val), if it is between min and max the value is 0 (it is inside the rectangle), if it is more than max the distance is (val - max).

If you are doing Euclidean, square each distance then add them together. I do Manhattan, so just use the absolute value.

Yep, what Skilgannon said. Sorry I forgot to put comments in that interface.

If your'e wondering, this is used to compare the search point to the bounding box associated with each branch of the tree, and allows efficient skipping of irrelevant branches.

Excellent. I was guessing it was that or related to that from reading your euclidian distance implementation.

When I write a WeightedSquareEuclidieanDistanceFunction and/or WeightedManhattanDistanceFunction, would you like me to commit them to your bitbucket hg repo? I'm happy to help contribute! :)

Sure, or if posted on the wiki or in a bot I can upload it to that some time. Thanks :)

DeBroglie rev0026 is up. Only change from rev0025 is your 3rd gen tree. Should perform pretty close to what it was doing before, though some differences are to be expected since your 3rd gen tree doesn't drop points. We'll see, though I have to get going to the doctor at the moment.

I tested with both the SqrEuclidean and Manhattan versions of my Weighted trees. Both seemed to work fine in several test battles with some bots I had sitting around. I ended up making a WeightedDistanceFunction class to be a superclass of both the WeightedManhattanDistanceFunction and WeightedSquareEuclideanDistanceFunction.. to duplicate less of the code involved in weighting.

The weighted DF should failover gracefully if given weights that mismatch the number of tree dimensions. Only thing I didn't implement was doing a Math.abs() on weights, since someone out there might invent a DistanceFunction that utilizes negative weights.

If the code on my bitbucket fork meets your approval, I can toss you a pull request. :)

EDIT: Made a new bitbucket with all the work in a single commit, and decided to make WeightedDistanceFunction abstract.

Neat! When I first took a quick look at the version you initially posted, I was thinking to myself that WeightedDistanceFunction should have been abstract yeah.

I'll merge it in some time shortly.

Alright. I've got them written on a fork of your bitbucket repo. Once I test them in DeBroglie to be sure they work, I'll drop a pull request to you. :)

!!!! That's a feature that I've really been wanting for an idea I had for DeBroglie's gun! Excellent! You ought to edit the main page to mention that the most up-to-date version of the code is available off-wiki. Thanks for the heads-up Rednaxela!

Seems pretty great - is the 3rd gen tree threadsafe? The earlier iterations do not appear so.

No. Use of multiple threads isn't normal in Robocode, so it wasn't designed to handle that. Also, adding thread safety checks would add a fairly notable performance penalty.

Seems that the "points" array is getting set to 'null' in a newly created child node. Assuming you haven't modified the code of the tree, and you're not doing any multithreading things, I can only see one possible cause: *All* of the data points are being put in the same child node, causing the newly created child node to itself be split while the upper level's splitLeafNode is still running. This implies that calculateSplit() is returning true when it shouldn't.

Could you add code to line 169 to print the list of coordinates stored in the node being split, or use a debugger to obtain similar information? My suspicion is that the coordinates you're putting into the tree are very unusual in some manner, possibly involving NaN values.

Sorry for the wall of numbers. Here are the values inside the splitLeafNode function:

Points array: [ [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.27476300750221805, 0.0, 0.5, 0.5, 0.05944248946787964, 0.05944248946787964], [0.25781116652220715, 0.08692892561404503, 0.49442777954156447, 0.525842295924762, 0.06786100210077804, 0.14692687699385826], [0.2578177856998261, 0.08372619661301722, 0.49463837126786636, 0.5064605739811905, 0.06785023783184158, 0.1469334424631162], [0.2578214298492213, 0.08292549845220197, 0.4946909579122118, 0.5016151434952976, 0.06784441533138576, 0.14693385451422164], [0.25782433041558794, 0.08272532316252756, 0.49470410169693013, 0.5004037858738244, 0.06783982767738157, 0.14693272660841677], [0.25782704507786713, 0.0826752795385066, 0.4947073884210326, 0.500100946468456, 0.06783554880964597, 0.14693121360417843], [0.25782971324440696, 0.0826627688903635, 0.4947082111092713, 0.5000252366171141, 0.0678313472047577, 0.14692960432136848], [0.2578323697665857, 0.08265964148995872, 0.4947084178030773, 0.5000063091542785, 0.06782716496882069, 0.14692797097446295], [0.25783502335720493, 0.08265885990173155, 0.49470847049921196, 0.5000015772885695, 0.06782298762433847, 0.14692633161848062], [0.2578376761944629, 0.0826586647665601, 0.49470848469597223, 0.5000003943221424, 0.06781881155096657, 0.14692469076738635], [0.25784032882290964, 0.08265861624464657, 0.49470848926786565, 0.5000000985805355, 0.06781463584332002, 0.14692304954976892], [0.2578429813786835, 0.0826586043760398, 0.49470849143351225, 0.5000000246451339, 0.06781046027498529, 0.14692140824779062], [0.2578456338958197, 0.08265860167075158, 0.4947084929975659, 0.5000000061612835, 0.06780628478936644, 0.1469197669319714], [0.2578482863828274, 0.08265860125628488, 0.49470849441118986, 0.5000000015403209, 0.06780210937228809, 0.1469181256199622], [0.2578509388418348, 0.08265860141451545, 0.49470849578717485, 0.5000000003850803, 0.06779793402021453, 0.14691648431616464], [0.2578535912733745, 0.08265860171591212, 0.49470849715371845, 0.5000000000962701, 0.06779375873223772, 0.14691484302170008], [0.2578562436775801, 0.08265860205309222, 0.4947084985178703, 0.5000000000240675, 0.0677895835081634, 0.146913201736816], [0.257858896054486, 0.08265860239921004, 0.49470849988139254, 0.5000000000060169, 0.06778540834789157, 0.14691156046162138], [0.2578615484041011, 0.0826586027475541, 0.49470850124472593, 0.5000000000015042, 0.06778123325144109, 0.1469099191960998], [0.25786420072642846, 0.08265860309644661, 0.4947085026079805, 0.500000000000376, 0.06777705821881806, 0.1469082779402436], [0.2578668530214694, 0.08265860344546808, 0.4947085039711838, 0.500000000000094, 0.06777288324998178, 0.14690663669408965], [0.25786950528922475, 0.08265860379451359, 0.4947085053343428, 0.5000000000000234, 0.06776870834495623, 0.1469049954576125], [0.25787215752969567, 0.08265860414355704, 0.49470850669745914, 0.5000000000000058, 0.06776453350371553, 0.14690335423083412], [0.2578748097428828, 0.08265860449259181, 0.4947085080605333, 0.5000000000000014, 0.06776035872627743, 0.1469017130137357], [0.25787746192878697, 0.08265860484161626, 0.4947085094235653, 0.5000000000000003, 0.0677561840126425, 0.1469000718063138], [0.2578801140874092, 0.08265860519062998, 0.4947085107865553, 0.5000000000000001, 0.06775200936277642, 0.14689843060859753], null ] bucket capacity is 50 Size is currently 48 Split dimension is 5 Split value is 0.10318817199105064

The last point there is null...

Yes but its index 49, and size is currently 48. :)

Yeah, that null there is not a problem, though it does look like I accidentally made the nodes split one entry too early. That wouldn't cause any issue besides a tiny amount of wasted memory though.

Later today I'll see if I can replicate the issue with that list of points.

Hello Rednaxela,

I just converted your KD-tree Java code to C#. Do you have unit tests for KD-Tree? They would allow me to test if the conversion succeded.

I don't know if you could modified it to run the C# implementation, but K-NN algorithm benchmark has an accuracy checker with linear search, as with performance benchmark. You can give it a try.

Yeah, I didn't use any unit tests when writing the KD-Tree, just some functional tests. The most thorough of which is from the K-NN algorithm benchmark that Nat and I wrote. It repeatedly tests the KD-Trees with a very large set of random set of points against known-good results from a very very simple linear-time k-nn search.

I just published my C# implementation of a KD-Tree based on Rednaxela's java implementation here on robowiki.

Hi Rednaxela & Ojd,

I'd like to have remove functionality and added the method below to KdNode. It is based on Ojd's C# variant and adjusts. KdNode needs and extra field: parent. It seems to do what I want, but feel not confident about some points:

• do the bounds of parent nodes to be adjusted as well?
• how to add it nicely to the NearestNeighborIterator?
• what if you want to re-weight after n removals? (remove remainder and add again?)

Thanks, Arie

    public boolean remove(double[] point, T value)
    {
        KdNode<T> cursor = this;
        while (!cursor.isLeaf()) {
            if (point[cursor.splitDimension] > cursor.splitValue) {
                cursor = cursor.left;
            } else {
                cursor = cursor.right;
            }
        }
        for (int i = 0; i < cursor.size; i++) {
            if (cursor.data[i].equals(value)) {
                double[] cursorPoint = cursor.points[i];
                // remove this points
                cursor.data = ArrayUtil.remove(cursor.data, i);
                cursor.points = ArrayUtil.remove(cursor.points, i);

                // fix tree size all the way up to the root
                KdNode<T> parent = cursor.parent;
                do {
                    parent.size--;
                    parent = cursor.parent;
                } while (parent != null);


                // adjust _minBound and _maxBound after removing an item.
                if(cursor.points.length > 0){
                    for (int j = 0; j < dimensions; j++) {
                        if (Double.isNaN(cursorPoint[j])) {
                            if (!Double.isNaN(minBound[j]) || !Double.isNaN(maxBound[j])) {
                                singlePoint = false;
                            }
                            minBound[j] = Double.NaN;
                            maxBound[j] = Double.NaN;
                        }
                        else if (minBound[j] > cursorPoint[j]) {
                            minBound[j] = cursorPoint[i];
                            singlePoint = false;
                        }
                        else if (maxBound[j] < cursorPoint[i]) {
                            maxBound[j] = cursorPoint[i];
                            singlePoint = false;
                        }
                    }
                }
                else{
                    // last point at this cursor was removed.
                    minBound = null;
                    maxBound = null;
                }
                return true;
            }
        }
        return false;
    }

To answer your questions:

• Actually, technically you don't need to adjust ANY bounds at all. It won't affect the correctness of the result. The only consequence is that the searches may be slightly slower than optimal. If you are adjusting the bounds though, you might as well adjust the parent ones as well, because that's where a large chunk of the (smallish) performance impact would be.

On one hand adjusting the bounds makes the removal slower, but on the other hand it makes the search a little faster. To really know if it's worth adjusting the bounds, would probably require benchmarking with some code that's making realistic use of the removal.

• To add it nicely to the iterator, I think you'd need to have the iterator keep track of the last point it returned, so it can call a remove on that.

• If I understand what you mean... You should note that the structure of the tree is such that you can't just remove a leaf node, because every node must either be a leaf node or have two child nodes. To prune back the tree after removing items, you'd need to implement a "merge siblings" algorithm. This algorithm would need to first check that the combined size of both would fit comfortably in one node, and if that's the case basically perform the reverse of what "splitLeafNode" does. It'll also need to take into account the possibility that one sibling may not be a leaf node while the other is.

Some other notes:

• You don't appear to be changing the "size" of the node itself, just the parents, which would be a problem. I also don't know that "ArrayUtil.remove" is what you want there.

Note that the "data" and "points" arrays have extra capacity beyond what's used and that "size" (or "_count" in the case of Ojd's C# variant) tracks the number of elements actually used.

(I also can't seem to find any documentation of a "ArrayUtil.remove" in either Java or C# so I'm a bit confused)

• The code to adjust the bounds there appears to be incorrect. It looks like what's happening in that code is extending the bounds to contain the removed point... and the bounds already contain that anyway.

Thanks for your quick reply!

Good to know that the bounds don't affect the correctness. I agree, then it is a performance trade-off to adjust them or not.

You only really need to perform "merge siblings" when ALL points from the node are removed, isn't it?

Indeed, the size of the node itself must be adjusted as well:

KdNode<T> parent = cursor.parent;
do {
    parent.size--;
    parent = cursor.parent;
} while (parent != null);

Also ArrayUtil.remove is my own method:

        /**
     * Remove the element from the array at location i.
     * @param as original array.
     * @param i index indicating the element to be removed.
     * @return new array with length (as.length-1) if a is contained in as, or else a copy of the original array.
     */
    public static int[] remove(int[] as, int i){
        int n = as.length;
        if(i < 0 || i >= n) {
            return Arrays.copyOf(as, n);
        }
        int[] copy = new int[n-1];
        System.arraycopy(as,0,copy,0,i);
        System.arraycopy(as,i+1,copy,i,n-1-i);
        return copy;
    }
    public static int[] remove(int[] as, int i){
        int n = as.length;
        if(i < 0 || i >= n) {
            return copyOf(as, n);
        }
        int[] copy = new int[n-1];
        System.arraycopy(as,0,copy,0,i);
        System.arraycopy(as,i+1,copy,i,n-1-i);
        return copy;
    }

Removal is O(n), but you cant do much better. There is also a variant for double[] and double[][].

The bounds indeed really need to determine the min and max by iterating over all points.

Back to the keyboard...

Well, to be clear the bounds affect the correctness if they are *too small*, but the bounds being too big (as is the case after removing) has no impact.

Really, you don't have to "merge siblings" when all points are removed from a node even, and it could (for sake of tree balance) be worth merging sibling nodes before they're completely empty (i.e. if both nodes had half their points removed)

With regards to the removing from the array, actually you can do it in O(1) time due to the fact that 1) unused array elements are expected, and 2) the array of points in a leaf node are unordered. You just need to overwrite the removed element with the last element, and then remove the last element:

points[i] = points[size-1];
data[i] = data[size-1];
points[size-1] = null;
data[size-1] = null;
size--;

(Oh, and when removing elements, be careful with how you're looping over them at the same time. You need to decrement "i" when the remove occurs, because what points[i] refers to changes when you remove the element)

If you wanted to take a look at Gilgalad, I think I have this working correctly in my tree. However, the feature is never used since it is faster to just have one large bucket unless the size limit is greater than about 10000 or so, and if I used that many points I would probably just use them all.